Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in Cedar Hills, OR | Northfield Lock & Key
We’re an independent Medeco service provider working throughout Cedar Hills, Oregon, and we handle everything from rekeying original Biaxial cylinders to full Maxum deadbolt replacement. We also offer Medeco repair in West Slope for homeowners just outside our core area. What sets our work apart here is simple: we know how Cedar Hills’ wet winters and mid-century door frames affect high-security hardware, and we fix the whole assembly rather than just the cylinder. Call Len Brackett and the team at Northfield Lock & Key at (855) 341-3373 for a free estimate on any Medeco job in the 97005 zip code.
Why Cedar Hills Residents Choose Us for Medeco Service
Medeco cylinders are precise machines, and they don’t fail the way a builder-grade Kwikset does. When a restricted keyway clogs with grit, or a Biaxial cam wears out, you need a locksmith who’s actually taken these locks apart hundreds of times. That’s us. Len Brackett has spent over two decades working on Medeco hardware, and Medeco sales & service is a core part of what we do for homes across Cedar Hills and the surrounding Washington County area.
We stock genuine Medeco OEM pins, cams, and tailpieces for the models most common in this area. When you call with a sticking deadbolt on a 1968 split-level off Cedar Hills Blvd, we show up with the right parts on the truck, not a promise to order something and come back next week. And because we’re Cedar Hills service area regulars, we already know the door construction, the weather patterns, and the lock hardware you’re likely dealing with before we even pull into the driveway.
Styles & brands we work with
Common Medeco Locksmith Problems We Solve in Cedar Hills
- Restricted keyways clogged with grit and oxidized brass dust. Older Medeco cylinders in original Cedar Hills knobsets accumulate years of fine debris. The key hangs, refuses to fully seat, or turns rough. We disassemble, clean, and re-pin with OEM components, and the cylinder runs smooth again without replacing the whole lock.
- Deadbolts that stick every wet season. From roughly October through May, the Willamette Valley rain swells original wood entry doors on Cedar Hills ranches and split-levels. The Medeco bolt drags on the strike plate, and the cylinder feels stiff even when the internal mechanism is fine. We address the alignment and strike plate, not just the lock body.
- Worn tailpieces and cams on aging Biaxial cylinders. We regularly find 1960s and 1970s front doors where the bolt turns but won’t fully throw. The cam is slipping past the bolt tail. This is a parts-replacement job, and we keep the OEM tailpieces and cams in stock for fast turnaround.
- Lost or never-transferred restricted key blanks. When a Cedar Hills homeowner inherits a Medeco system from a previous owner and no one holds the original keyway card, they’re often told they need an all-new lock. Not necessarily. We can assess the existing cylinder, cut new keys from the lock itself where possible, and re-pin the cylinder to restore a working restricted key set.
- Front and back doors keyed differently. Many older Cedar Hills homes still have a back or garage-side lock keyed separately from the front, often a completely different brand. We rekey the Medeco front cylinder and bring the other locks onto one key where the hardware allows it.
Medeco Service in Cedar Hills: What Local Conditions Mean for Your Equipment
Here’s the thing about Medeco hardware in Cedar Hills specifically: because this is unincorporated Washington County, there’s no single city permit or code office for lock and door-hardening work. In Portland proper, a homeowner upgrading to a high-security deadbolt often navigates municipal inspection steps. Here, the locksmith’s judgment is the real quality control. That means when we install or service a Medeco deadbolt on a 1960s ranch, we’re paying attention to what a code inspector might flag elsewhere: is the strike plate anchored into the jamb stud or just the trim? Is the door frame itself solid enough to hold a hardened bolt under force? Many of the original hollow-core wood and early steel entry doors along the Cedar Hills Blvd corridor were built before high-security hardware was a consideration. We routinely pair Medeco cylinder service with structural reinforcement of the strike plate and jamb because in Cedar Hills, that’s the difference between a lock that looks secure and a door that actually resists forced entry.
On a rainy October call off Cedar Hills Blvd, our tech found a split-level ranch whose original Medeco deadbolt had stopped throwing fully. The swollen wood door had shifted the strike alignment, and the worn cam was slipping past the bolt tail. We re-pinned the cylinder to the homeowner’s existing restricted key, replaced the tailpiece and cam with OEM parts, and added a reinforced strike plate. We also rekeyed the differently-keyed back door to one key. The bolt now throws clean, and the family carries a single Medeco key.
Medeco Models & Products We Service in Cedar Hills
We work on the full range of Medeco residential hardware found in Cedar Hills homes: the classic Medeco Original pin tumbler cylinders still on some 1960s doors, the Biaxial line (both standard and high-security configurations), the M3 and M3+ keyway cylinders, and the Maxum deadbolt series. Our parts approach is straightforward: when a restricted keyway or warranty-relevant component demands it, we fit genuine Medeco OEM cylinders, pins, and keys. For strike plates, reinforcement hardware, and door-prep work, we use quality aftermarket components rated for the job. If a cylinder can be cleaned, re-pinned, and rekeyed, we’ll tell you that plainly. We only recommend full replacement when the shell, cam, or bolt is genuinely worn out.
Medeco Service Pricing in Cedar Hills
What you’ll pay depends on what the lock actually needs. Rekeying a Medeco Biaxial cylinder in Cedar Hills typically runs $25 to $45 per cylinder including new keys. A service call including rekeying for one Medeco deadbolt generally lands between $95 and $180. Diagnosing and repairing a worn cam or tailpiece with OEM parts ranges from $75 to $165. Full Medeco Maxum deadbolt installation, including door prep and reinforced strike plate, spans $180 to $350. Every job starts with a free phone estimate. We quote the full price before anyone is dispatched, and the price on the invoice is the price you approved. No call-out surcharge added on arrival. Call (855) 341-3373 to get an exact quote for your Cedar Hills home. If the lock isn’t working, there’s a reason – let’s just find it.
Serving Cedar Hills, OR — Our Local Coverage Area
We’re based in the Cedar Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help. That includes Medeco repair in Raleigh Hills and surrounding neighborhoods.
FAQs – Medeco Locksmith in Cedar Hills
Yes, in most cases we can rekey a Medeco cylinder without the original keyway card by disassembling the cylinder, reading the existing pin configuration, and re-pinning to a new key. The keyway card matters most when you need additional restricted key blanks cut through Medeco’s controlled distribution. If you’ve lost all keys to a restricted Medeco cylinder, we can often still rekey it, though some high-security M3+ configurations may require cylinder replacement. Call (855) 341-3373 and we’ll tell you exactly what your lock needs.
Because the long Willamette Valley rainy season swells your original wood entry door and frame, shifting the strike plate alignment so the hardened Medeco bolt drags. The cylinder itself is usually fine. We correct the strike plate position, adjust the door or jamb where needed, and often add a reinforced strike plate so the problem doesn’t return with the next wet season.
Only if the door assembly gets reinforced at the same time. A Medeco cylinder resists picking, drilling, and unauthorized key duplication, but if it’s mounted on a hollow-core door with a strike plate screwed into trim wood, the lock isn’t the weak point; the door is. We’ll give you an honest assessment, and in Cedar Hills we often recommend pairing the Medeco cylinder with a reinforced strike plate, longer jamb screws, and sometimes door edge reinforcement. Call (855) 341-3373 for a straight answer on your door.
Not to the same physical key, because Medeco and Kwikset use entirely different keyway and pinning systems. You can have both locks rekeyed so they work on separate keys, or we can install a Medeco-compatible cylinder in the back door so a single Medeco key operates both. On many Cedar Hills ranches, the cleanest solution is replacing the old Kwikset with a Medeco cylinder matched to your front door.
Yes. We handle Medeco cylinders on the multifamily and senior-housing properties along the Cedar Hills Blvd corridor, including master-key system maintenance, rekeying between tenants, and cylinder repair. We also provide Medeco in West Haven for properties near that border area. These properties generate repeat work because wear is constant and turnover rekeys are frequent. We provide written scopes and flat per-lock pricing for property managers. Call (855) 341-3373 to schedule an assessment.
Service Areas Near Cedar Hills
We serve Cedar Hills and the surrounding communities across Washington County and the west side. If you’re in Medeco service in Lents, we can help with high-security cylinder work there. We also regularly handle Medeco jobs in Medeco service in North Portland, plus Beaverton, Aloha, and the West Haven-Sylvan area. Our truck carries the Medeco parts these mid-century homes need.
Book Your Medeco Service in Cedar Hills Today
If your Medeco lock is sticking, won’t throw, or you want your Cedar Hills home rekeyed to a single restricted key, call Northfield Lock & Key at (855) 341-3373. We also cover Medeco in West Haven-Sylvan with the same response times. We’re independent Medeco service providers, not a manufacturer call center, and we’ll give you an honest assessment and a free estimate before any work begins.
Written by Len Brackett, Owner at Northfield Lock & Key, serving Cedar Hills and Washington County with Medeco locksmith service.