Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateKwikset Locksmith in Beaverton, OR | Northfield Lock & Key
If you need Kwikset service in Beaverton, we can usually be at your door the same day. Northfield Lock & Key is an independent locksmith shop serving all of Beaverton, and we stock OEM Kwikset cylinders, pins, and SmartKey rekey kits so most jobs are handled in one visit. What makes our Kwikset work different here is simple: we know which models fail predictably in Beaverton’s wet climate and which are worth rebuilding instead of replacing. Call (855) 341-3373 for a straight answer and a free estimate before anyone is dispatched.
We’re not affiliated with Kwikset or any manufacturer. That independence means we give you an honest assessment of your lock rather than steering you toward a brand upgrade you don’t need. From a 1960s Tylo knob on a Cedar Hills Kwikset service call to a SmartKey deadbolt on a Murrayhill townhome, we cover the full Kwikset range across Beaverton.
Why Beaverton Residents Choose Us for Kwikset Service
Len Brackett founded Northfield Lock & Key after two decades of handling locks, deadbolts, and ignition work across Oregon, and he brought that same no-drama approach to Beaverton. As he puts it: “If the lock isn’t working, there’s a reason – let’s just find it.” That’s the operating principle on every Kwikset job we take.
We’re familiar with Kwikset sales & service across the entire product line: builder-grade knob sets, deadbolts, SmartKey cylinders, and electronic keypad models. Because we’re local to Beaverton, we know which Kwikset failures show up repeatedly in this specific housing stock. A 1970s split-level in Highland wears its original hardware differently than a 2015 townhome near Progress Ridge, and we stock parts for both. We use genuine OEM Kwikset pins, cylinders, and rekey kits so your keyway and warranty stay intact, and we supplement with quality aftermarket strike plates where Kwikset’s stock hardware is the weak point. Our service area covers all of Beaverton service area, including the 97075, 97076, 97077, and 97003 ZIP codes.
Styles & brands we work with







Common Kwikset Locksmith Problems We Solve in Beaverton
- SmartKey cylinders that jam or refuse to rekey. Kwikset’s SmartKey system is convenient until rain-driven grit works its way into the cylinder. We see this constantly on exterior deadbolts in Beaverton’s wet season. We pull the cylinder, clear the debris, lubricate it, and rekey it with a fresh OEM kit – usually in under an hour.
- Worn Tylo and Cove builder-grade knob locks. Original Kwikset Tylo and Cove knob sets on 1950s-70s Cedar Hills and Highland ranch homes carry decades of latch wear and stripped strike plates. We can rekey them, but we’ll also tell you honestly when a 40-year-old knob lock has outlived its usefulness and a replacement is the smarter spend.
- Seized or rusted exterior deadbolts from Willamette Valley humidity. Constant rain and high humidity rust Kwikset deadbolt internals, especially on north-facing doors. Add a winter freeze event like the ice storms that hit the Portland metro, and you get snapped keys and frozen cylinders. We extract broken keys and rebuild or replace the cylinder as needed.
- Electronic Kwikset keypad locks with dead batteries or lost programming. Newer 97006 and 97007 subdivisions increasingly ship with Kwikset 900-series electronic deadbolts. Homeowners change codes, forget them, or let the batteries die and lose access. We reprogram, replace batteries, and reset keypads on site.
- Builder-shared keyways in Murrayhill and Cooper Mountain. Dozens of homes in those subdivisions were built by the same few builders using identical master-keyed Kwikset locks. If your key opens a neighbor’s door, that’s why. We rekey to a unique keyway so your key only works on your lock.
Kwikset Service in Beaverton: What Local Conditions Mean for Your Equipment
Here’s something that doesn’t show up on generic Kwikset pages: Beaverton’s tech-campus density along the Sunset Corridor means a significant share of our Kwikset work is commercial, not just residential lockouts. Nike’s world headquarters, Intel’s Ronler Acres campus, and Tektronix all sit within a few miles of each other, and the offices and institutional suites around the Cedar Hills and Progress Ridge retail cores turn over tenants constantly. That means Kwikset repair in Raleigh Hills and Progress Ridge commercial spaces is a routine part of our week, and we’re set up for it with the right keyway kits and pinning supplies on the truck. A residential locksmith who only does lockouts would fumble that work. We don’t.
And the residential side has its own Beaverton-specific wrinkle. Because the same builders put identical Kwikset locks into entire streets of Murrayhill and Cooper Mountain homes, one rekey often becomes three. A homeowner on a Cooper Mountain street called us because her Kwikset SmartKey deadbolt wouldn’t accept the rekey tool – common when these builder-installed cylinders sit in our wet climate and collect grit. We pulled the cylinder, cleared and lubricated it, rekeyed it to a fresh OEM Kwikset keyway, and then flagged to two neighbors on the same block that their identical builder locks likely shared the original keyway. What started as one call became three rekeys in an afternoon.
Kwikset Models & Products We Service in Beaverton
We work on the full Kwikset range you’re likely to find in Beaverton homes and offices. That includes the Tylo and Cove builder-grade knob sets common on older Cedar Hills and Highland ranch homes, Kwikset in West Haven and nearby areas, the 660 and 665 single-cylinder deadbolts, SmartKey deadbolts and entry handlesets, and 900-series electronic and keypad deadbolts on newer builds. We carry OEM Kwikset cylinders, pins, and SmartKey rekey kits on the truck, which means most rekeys and cylinder rebuilds in Beaverton are done in a single visit. For strike plate failures, we use quality aftermarket reinforcement hardware where Kwikset’s stock parts are the weak point. When a SmartKey cylinder is scored or a knob lock has hit its 40th birthday, we’ll tell you straight whether a rebuild is worth it or a fresh OEM cylinder makes more sense.
Kwikset Service Pricing in Beaverton
Kwikset service pricing in Beaverton depends on what the lock actually needs. A straightforward rekey runs lower than a cylinder rebuild, and a full deadbolt replacement with hardware runs higher. Here’s the range we quote day to day:
- Kwikset rekey (single cylinder): $65-$110
- SmartKey rekey or jam fix: $75-$120
- Deadbolt installation (Kwikset 660/665): $95-$160
- Cylinder rebuild or replacement (OEM Kwikset): $85-$140
- Electronic keypad deadbolt programming or battery replacement: $65-$100
Every job gets a firm quote on the phone before we dispatch – that’s the price on the invoice, with no call-out surcharge added on arrival. Call (855) 341-3373 for a free estimate.
Serving Beaverton, OR — Our Local Coverage Area
We’re based in the Beaverton area and know this community well, including Kwikset in West Haven-Sylvan. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kwikset Locksmith in Beaverton
Yes, we rekey SmartKey locks regularly. The most common issue in Beaverton is a cylinder so clogged with rain-driven grit that the rekey tool won’t seat properly. We pull the cylinder, clear and lubricate it, then rekey it with a fresh OEM Kwikset keyway. Replacement is only needed if the cylinder is scored or damaged internally. Call (855) 341-3373 and we’ll tell you which applies to yours.
It depends on the lock’s condition. If the latch mechanism is intact and the cylinder isn’t scored, a rekey gets you a fresh keyway for a fraction of replacement cost. If the latch is worn or the strike plate is stripped after 50 years of use, we’ll say so plainly and quote you an honest replacement. Either way, you get a straight assessment – not a sales pitch.
In many Murrayhill and Cooper Mountain homes, yes. Several builders used identical master-keyed Kwikset locks across dozens of adjacent properties. If you suspect your key opens a neighbor’s door, call (855) 341-3373 and we’ll verify the keyway and rekey your locks to a unique one.
Beaverton’s constant rain and humidity rust the internal components of exterior deadbolts, and winter freeze events make it worse. Moisture gets inside the cylinder, temperatures swing around freezing, and the mechanism binds or a key snaps. We disassemble, clean, and lubricate the cylinder, or replace it with an OEM Kwikset unit if the corrosion has gone too far.
We can. We reprogram Kwikset 900-series keypad deadbolts, replace dead batteries, and reset lost codes on site in 97006 and 97007. If the keypad itself has failed, we’ll quote a replacement rather than pretending a dying unit can be coaxed back to life. Call (855) 341-3373 for a free estimate.
Service Areas Near Beaverton
Beyond Beaverton, we run Kwikset service calls into Dundee, Saint Helens, Hubbard, Portland, Kenton, and West Haven-Sylvan. For Kwikset work further south, see Kwikset service in Lake Oswego, and for the east side, Kwikset service in Oak Grove.
Book Your Kwikset Service in Beaverton Today
Most Kwikset rekeys and cylinder fixes in Beaverton are same-day jobs, and we quote the full price on the phone before anyone is dispatched. Call (855) 341-3373 now for a free estimate, and Len or one of our techs will get you sorted without the drama.
Written by Len Brackett, Owner at Northfield Lock & Key, serving Beaverton and the surrounding metro since 2003.